Special Order

RossionCar-lr

ROSSION Q1 by Rossion Automotive, Riviera Beach, Florida

Special Order Formulations

PRO-SET Special Order Epoxies are designed for very specific applications or manufacturing processes. Each of them has been formulated to meet the demands of a specific customer when the volume warrants. Even though developed for a well-defined application, as the composite industry grows and changes, new uses are often found for these Special Order formulations.

The resins and hardeners in the Special Order group are identified by a four-digit number preceded by the letter M. All resin numbers begin with the number 1 and the hardeners begin with the number 2. Combinations are described by the resin and hardener numbers separated by a dash (M1000-M2000). A few formulations begin with the letter “X” for “Experimental.”

Please allow longer lead times when ordering Special Order formulations


Fire Retardant Systems

PRO-SET fire retardant epoxy resins are paired with previous-generation PRO-SET M2043, M2044, and M2046 Hardeners to control cure speed rather than the LAM or INF hardeners in our New Standard PRO-SET product line. These hardener formulations are still available to order.

PRO-SET XR28A Resin is a low-viscosity, fire retardant resin for the manufacture of composite laminates and is compatible with vacuum infusion processes.

PRO-SET XR29A Resin is a thixotroped, fire retardant resin that works well for hand wet out or use in an impregnating machine.

Special Order Fire Retardant Epoxies — Technical Data

System Epoxy Type Cure Speed
 XR28A-M2043 Fire Retardant Infusion Medium
 XR28A-M2044 Fire Retardant Infusion Slow
 XR28A-M2046 Fire Retardant Infusion Extra Slow
 XR29A-M2043 Fire Retardant Laminating Medium
 XR29A-M2044 Fire Retardant Laminating Slow
 XR29A-M2046 Fire Retardant Laminating Extra Slow

 


Laminating Systems

Very long open time cure systems and toughened systems are included in this group of products.

Special Order Laminating Epoxies — Technical Data

System Epoxy Type Cure Speed
 M1038-M2007 Latent Cure Laminating Extra Slow
 M1038-M2009 Latent Cure Laminating Extra Slow
 M1002-M2015 Toughened Laminating Extra Fast
 M1002-M2042 Toughened Laminating Extra Slow
 M1002-M2043 Toughened Laminating Fast
 M1002-M2044 Toughened Laminating Medium
 M1002-M2046 Toughened Laminating Slow
 XR29A-M2043 Fire Retardant Laminating Medium
 XR29A-M2044 Fire Retardant Laminating Slow
 XR29A-M2046 Fire Retardant Laminating Extra Slow

 


Infusion Systems

Special Order Infusion Epoxies — Technical Data

System Epoxy Type Cure Speed
 XR28A-M2043 Fire Retardant Infusion Medium
 XR28A-M2044 Fire Retardant Infusion Slow
 XR28A-M2046 Fire Retardant Infusion Extra Slow

Clear Coating Systems

Developed for coating and fiberglass cloth application where an exceptionally clear finish is desired. Thin film applications roll out and tip off smoothly, requiring less sanding in preparation for finish coatings. Cures water clear.

Special Order Clear Coating Epoxies — Technical Data

System Epoxy Type Cure Speed
 M1038-M2018  150°Tg Clear Coating Slow
 M1014-M2018  Clear Coating Slow

 


Clear Casting Systems

Developed for casting. Cures water clear.

Special Order Clear Casting Epoxies — Technical Data

System Epoxy Type Cure Speed
 M1047-M2053  Clear Casting Slow

 


Adhesive Systems

There are high-elongation toughened adhesives, as well as a high flow version of our standard PRO-SET Adhesive for concrete patching. There is also a general purpose rapid cure adhesive and high elongation adhesives.

Special Order Adhesive Epoxies — Technical Data

System Epoxy Type Cure Speed
 M1007-M2032  High-Elongation Adhesive Medium
 M1033-M2036  High-Elongation Paste Medium
 M1005-M2005  High-Flow Epoxy Adhesive Fast
 M1007-M2012  Fast Cure Five Minute Extra Fast

 


Tooling Systems

Special Order Tooling Surface Coat Epoxies come in Fast, and High-Temp, and are available in either black or white. Technical data sheets for these products are linked in the table below.

Special Order Tooling Epoxies — Technical Data

System Epoxy Type Cure Speed
 M1018-M2043 White Tooling Surface Coat Fast
 M1018-M2010 White Tooling Surface Coat High-Temp
 M1019-M2043 Black Tooling Surface Coat Fast
 M1019-M2010 Black Tooling Surface Coat High-Temp

Expanding Epoxy Foam System

View Expanding Epoxy Foam demonstration video

Special Order Expanding Epoxy Foam — Technical Data

System Epoxy Type Cure Speed
 M1034-M2037  Expanding Foam  Fast

 


Compression Molding System

 

Special Order Compression Molding Epoxies — Technical Data

System Epoxy Type Cure Speed
M1012-M2010 High-Temp Compression Molding “Snap” at 350°F