Process Equipment

In addition to the process equipment we offer, we can also suggest manufactures of epoxy-compatible process equipment to meet your specific needs. Just ask your PRO-SET Regional Sales Manager, or contact our Technical Department at 888-377-6738.

process equipment group-lrPUMPS

High-Capacity Positive Displacement Pumps

Product 

Description

308 High-Capacity Pump

308 pump
3 to 1 Ratio

Dispenses three parts resin and one part hardener (3:1) by volume. It consists of two separate parallel pump systems, one for the resin and one for the hardener. The two systems are operated simultaneously by a single lever. The pump delivers 67.1cc of resin and hardener per full stroke of the dispensing lever. The reservoirs hold two gallons of resin and one gallon of hardener.

318 High-Capacity Pump with Drum Adapter

313pump
3 to 1 Ratio

Consists of two separate parallel pump systems, one for the resin and one for the hardener. The two systems are operated simultaneously by a single lever. The pump dispenses PRO-SET Laminating and Infusion resins and hardeners at a 3:1 ratio by volume. This pump was designed to be connected to PRO-SET drums elevated slightly above the pump, via hoses and plumbing fittings available at most hardware stores. Because each set up will need to be customized for each fabricator’s needs, these are not included with the pump.

Adhesive Dispensing Guns

300-B Pneumatic Dispensing Gun

 

300-B Pneumatic Dispensing Gun-lrThe air-powered, two-component dispenser is used with PRO-SET Adhesive cartridge sets to apply adhesive in larger assembly operations. The trigger controls 484 lb. of thrust for easy and precise adhesive application. Power is supplied by a standard shop air compressor.

300-X Manual Dispensing Gun

300-X Manual Dispensing Gun-lrThe manually operated, two-component dispenser is used with PRO-SET Adhesive cartridge sets to apply adhesive quickly, cleanly and accurately. The handle and trigger are die-cast aluminum and shaped for comfortable operation. A 26:1 trigger ratio dispenses the high-viscosity adhesive with ease and the gun’s heavy-duty construction assures precise adhesive application and long operating life.

300-MW Mixing Wands

300-MW-6-lrStatic mixing wands attach to the adhesive set cartridges to thoroughly blend resin and hardener components as they are dispensed. The tip can be trimmed to apply the appropriately sized bead of the adhesive mixture. One wand is supplied with each adhesive cartridge set.

Syringes

380-12 Syringes

 

Reusable syringes that can be loaded with an epoxy mixture for injecting into tight spots. Ideal for hardware bonding and small repairs. Holds 12 cc (about 0.4 fl oz). 12-count package.

Quality Control Dye

551 Yellow QA Dye for Resins / /552 Blue QA Dye for Hardeners

551 Quality Control Dye-lrDyed resins and hardeners provide an easy, reliable method for quality assurance. Yellow dyed resin and blue-dyed hardener when mixed thoroughly, produce a consistent green-tinted epoxy mixture. A streaked mixture indicates insufficient mixing. Available in 16 oz. containers.